Operating clips with a computer, Hd sdi a/b (dual-link) connectors (bnc type), Using the expresscard slot of a computer – Sony PMW-F3K User Manual
Operating Clips With a Computer
HD SDI A/B (Dual-Link) connectors (BNC
Dual-link output from the HD SDI A/B
connectors can be enabled by setting “Dual-Link
& Gamma Select” (page 116) of the VIDEO SET
menu to “1.5G YPbPr422 & Video.” Camera
images can be displayed on a video monitor that
supports Dual-Link connection.
When the CBK-RGB01 RGB and S-LOG Output
Option is installed, 1.5G RGB444, 3G YPbPr422
and 3G RGB444 signals can also be output.
Use commercially available BNC cables for
For details on the output formats, refer to the
Supplement in the supplied CD-ROM labeled
“Manuals for Solid-State Memory Camcorder.”
• When the SDI output setting is changed, the
sync signal for Dual-Link outputs may become
• When outputting signals from the HD SDI A/B
connectors, use the BP-U60 battery pack or
supply power via the DC IN connector.
i.LINK (HDV/DV) connector (IEEE1394,
Input/output of an HDV or DVCAM stream can
be enabled by changing the “SDI/HDMI/i.LINK
I/O Select” (page 115) setting of the VIDEO SET
A monitor or VTR that supports i.LINK can be
For details on i.LINK connection, see “Connecting
an External Device (i.LINK Connection)” on page
The clips recorded on SxS memory cards with
this camcorder can be controlled on a computer or
edited using the optional nonlinear editing
For these purposes, the clips on an SxS memory
card can be operated by directly loading the card
in a computer or by connecting the camcorder or
the optional SBAC-US10 SxS Memory Card
USB Reader/Writer to the computer, using an
USB cable as shown below.
Using the ExpressCard slot of a computer
If the computer is equipped with an ExpressCard/
34 or ExpressCard/54 slot, you can directly insert
the SxS memory card containing clips recorded
with this camcorder and access to the files.
For the operating requirements for the computer, see
“Using the Software” on page 13.
The SxS Device Driver Software on the CD-
ROM supplied with the camcorder must be
installed on your computer.
For information on installation of the driver, refer to
the ReadMe on the supplied CD-ROM.
For support information for the driver, visit the
With a Windows computer, check that a
Removable Disk appears in My Computer. This
indicates normal status.
With a Macintosh computer, an icon is displayed
on the menu bar.
Operating Clips With a
SxS memory card
Computer with SxS
Device Driver Software