Sony PMW-F3K User Manual

Page 150

Advertising
background image

Error/Warning Indications

150

Ap
pen

dix
e

s

Backup Battery End
Please Change.

The remaining power of the backup battery is insufficient.
Replace the battery with a new one.

Unknown Media(A)

1)

Please Change.

A partitioned memory card or one that contains recorded clips
exceeding the number permitted with this camcorder is loaded.
This card cannot be used with this camcorder. Remove it and
load a compatible card.

Reached Clip Number
Limit
Cannot Record on

Media(A)

1)

The maximum number of clips for a single memory card is
reached. No more clip can be recorded on the card.
Replace it with another card.

Media Error

Media(A)

1)

Needs to be

Restored

An error occurred with the memory card. The card requires
restoration.
Remove the card, load it again, and restore it.

Media Error
Cannot Record to

Media(A)

1)

Recording cannot be done, as the memory card is defective.
As playback may be possible, it is recommended to replace it
with another card after copying the clips, as required.

Media Error

Cannot Use Media(A)

1)

Neither recording nor playback can be done, as the memory
card is defective.
It cannot be operated with this camcorder. Replace it with
another card.

Cannot Use Media(A)

1)

Unsupported File System

A card of a different file system or an unformatted card was
inserted. It cannot be used with this camcorder.
Replace it with another card or format it with this camcorder.

Video Format Mismatch

The external signal input via the i.LINK connection cannot be
recorded, as the video format setting is different from the
signal format of the external input signal.
Change “System” of the OTHERS menu to match it to that of
the external signal.

Copy Protected Input
Cannot Record

The external signal input via the i.LINK connection cannot be
recorded, as the stream is copy-protected.
Check the input signal.

DVCAM Input Signal!
Cannot Record

The external signal input via the i.LINK connection cannot be
recorded, as it is a DVCAM stream.

Media Error
Playback Halted

An error occurred in reading data from the memory card, and
playback cannot be continued.
If this frequently occurs, change the memory card after
copying the clips, as required.

Media(A)

1)

Error

Recording cannot be done, as an error occurred with the
memory card.
If this frequently occurs, change the memory card.

HDD A

2)

Battery Near

End

Intermittent

Flashing

The battery power of the connected HDD will be exhausted
soon.
Change the battery at the earliest opportunity.

HDD A

2)

Battery End

Continuous

Rapidly
flashing

The battery of the connected HDD is exhausted. Recording
cannot be performed.
Stop operation to change the battery.

Not Enough Capacity

Change Media (A)

1)

There is not enough capacity for copying.
Replace the card with another one.

Reached Duplication
Limit

Change Media (A)

1)

The card have already ten clips having the same name as that
you tried to duplicate.
Replace the card with another one.

Warning indication
on LCD/viewfinder

Buzzer

Tally
lamps

Cause and measures

Advertising
This manual is related to the following products: