Sharp MX-M850 - Manual (Page 193)

97
Storing, editing, and deleting text strings
1
Touch the [Text] key in the stamp selection screen.
See steps 1 to 4 of " GENERAL PROCEDURE FOR USING STAMP " (page 84).
2
Touch the [Store/Delete] key.
3
Store a text string, or edit/delete a stored
text string.
• To store a text string, touch a key with no text stored.
A text entry screen will appear. A maximum of 50 characters
can be entered. To enter text, see "7. ENTERING TEXT" in
the User's Guide. When you have finished entering the text,
touch the [OK] key. The text entry screen will close.
• To edit or delete a text string, follow the instructions below.
To edit or delete a text string...
• When the key with the text string is touched, the following screen appears.
When the [Modify] key is touched, a text entry screen appears. The stored text string appears in the text entry
screen. Edit the text. To enter text, see "7. ENTERING TEXT" in the User's Guide. When you have finished entering
the text, touch the [OK] key. The text entry screen will close.
• When the [Delete] key is touched, the stored text is deleted.
• Text settings can also be configured in the Web pages. Click [Application Settings], [Copy settings] and then [Text
Settings (Stamp)] in the Web page menu.
Cancel OK
Pre-Set
First Page
All Pages
Store/Delete Recall Direct Entry
Stamp
Text
10 5
Store/Delete
No.01 AAA AAA
No.03 CCC CCC No.04 DDD DDD
No.02 BBB BBB
No.05
No.07 No.08
No.09 No.10
No.06
Back
1
3
Stamp
Text
Modify Delete Cancel
A text has been already stored to this
location. Change the text?