Sharp MX-M850 - Manual (Page 377)

57
DIRECT TRANSMISSION MODE
If you wish to send a fax ahead of other previously reserved fax transmissions, use direct transmission mode. The
original is transmitted directly to the receiving fax machine without being scanned into memory. When direct
transmission mode is used, transmission will begin as soon as the transmission in progress is completed (ahead of any
previously reserved transmissions).
When sending a fax from the document glass in direct transmission mode, only one page can be transmitted.
1
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
• Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation ( ). If placed in landscape (horizontal)
orientation ( ), an incorrect size will be detected. For a 5-1/2" x 8-1/2"R (A5R) size original, enter the original size
manually.
• Image rotation
8-1/2" x 11" and 5-1/2"x8-1/2"R (A4, B5R, and A5R) originals are rotated 90 degrees and transmitted in
8-1/2" x 11"R or 5-1/2" x 8-1/2" (A4R, B5, or A5) orientation. 8-1/2" x 11"R and 5-1/2" x 8-1/2" (A4R, B5, and A5)
originals cannot be rotated for transmission.
• Originals cannot be scanned in succession from both the automatic document feeder and the document glass and
sent in a single transmission.
System Settings (Administrator): Rotation Sending Setting
This is used to select whether or not a scanned original image is rotated before transmission.
The factory default setting is: rotate 8-1/2" x 11" to 8-1/2" x 11"R, and 5-1/2" x 8-1/2"R to 5-1/2" x 8-1/2" (A4 to A4R,
B5R to B5, and A5R to A5).
2
Enter the destination fax number.
(1) Touch the [Address Book] key in the base
screen.
(2) Touch the one-touch key of the desired
destination. The icon appears in
one-touch keys that contain fax numbers.
(3) Touch the [Condition Settings] key.
• Only one destination can be entered. A one-touch key in which multiple destinations are stored (group key) cannot be used.
• There is no need to touch the [To] key.
• If the network scanner expansion kit and Internet fax expansion kit are not installed, the [To] key and [Cc] key will not appear.
• In addition to specification by a one-touch key, a destination can also be specified by a search number. You can
also manually enter a destination or look up a destination in a global address book. For more information, see " 2.
ENTERING DESTINATIONS " (page 25).
Transmission
Frequent Use ABCD EFGHI JKLMN OPQRST UVWXYZ
1
2
10 5 15 To Cc
III III
GGG GGG
EEE EEE
CCC CCC
AAA AAA
JJJ JJJ
HHH HHH
FFF FFF
DDD DDD
BBB BBB
Global
Address Search
Address Entry
Sort Address
Sub Address
Address Review
Condition
Settings
Auto Reception
Fax Memory:100%
(2) (3)