Reversing the image (mirror image), E 107), Mirror – Sharp MX-M850 User Manual
Page 203: Image, Place the original, Select the special modes, Select mirror image, Press the [start] key ( )
107
REVERSING THE IMAGE (Mirror Image)
This feature is used to make a copy that is a mirror image of the original.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the
keys to switch through the screens.
(3) Touch the [Image Edit] key.
☞
3
Select Mirror Image.
(1) Touch the [Mirror Image] key so that it is
highlighted.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
4
Press the [START] key (
).
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have
selected sort mode, change originals and press the [START] key (
). Repeat until all pages have been scanned and then touch
the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key (
).
To cancel a mirror image setting...
Touch the [Mirror Image] key in the screen of step 3 so that it is not highlighted.
Original
Mirror image copy
OK
Mirror
Image
B/W
Reverse
Multi-Page
Enlargement
Centering
Full Bleed
Copy
Photo Repeat
OK
Special Modes
Image Edit
(1)
(2)