Sharp MX-M850 - Manual (Page 594)

24
■ Administrator Adjustment
*1 When a finisher (MX-FNX5) is installed.
*2 When a punch module is installed.
*3 When a finisher (MX-FNX6) or saddle stitch finisher (MX-FNX7) is installed.
*4 When a saddle stitch finisher (MX-FNX7) is installed.
*5 When a saddle unit is installed.
*6 When a folding unit is installed.
Item Factory default setting Page
■ Administrator Adjustment
74
●
Image Adjustment 74
X Edge Adjustment
74
‹ Copy Edge Adjustment (Original Edge Standard Position) –
‹ Copy Edge Adjustment (Registration Motor ON Timing) –
‹ SPF Original Edge Adjustment (Original Scan Start Position) –
X Off-Center Adjustment
74 ‹ Print Off-Center Adjustment –
‹ Original Off-Center Adjustment –
●
Option Adjustment 75
X Finisher * 1
75 ‹ Staple Position All 50
‹ Punch Position (Vertical Scan Direction)* 2 50
X Finisher * 3
75
‹ Staple Position 50
‹ Punch Position (Vertical Scan Direction)* 2 50
‹ Punch Position (Main Scan Direction)* 2 50
‹ Saddle Stitch Position* 4 All 50
‹ Saddle Fold Position* 4 All 50
X Saddle Unit * 5
75 ‹ Saddle Stitch Position All 50
‹ Saddle Fold Position All 50
X Paper Folding Unit * 6
75 ‹ First Fold Position All 50
‹ Second Fold Position All 50