Sharp MX-M850 - Manual (Page 6)

6
This chapter provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1) Finisher*
This can be used to staple output. The optional punch
module can be installed to punch holes in output.
☞
FINISHER (page 59)
(2) Saddle unit *
The output is folded at the center. The saddle stitch
function staples output at the centerline.
☞
SADDLE UNIT (page 60)
(3) Folding unit *
This folds output.
☞
FOLDING UNIT (page 61)
(4) Inserter*
Paper loaded in the inserter can be inserted into output
from the machine as covers and inserts.
☞
INSERTER (page 62)
(5) Automatic document feeder
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
☞
PLACING ORIGINALS IN THE AUTOMATIC
DOCUMENT FEEDER
(page 53)
(6) Front cover
Open this to remove a paper misfeed from the conveyor
unit or to switch the main power switch on and off.
☞
TURNING THE POWER ON AND OFF (page 18)
(7) Toner cartridge installation cover
Open this cover to replace a toner cartridge.
(8) Operation panel
This is used to select functions and enter the number of
copies.
☞
OPERATION PANEL (page 10)
*Peripheral device.
1
BEFORE USING THE MACHINE
(1) (2) (3) (4) (5) (8) (7) (6)