Sharp MX-M850 - Manual (Page 385)

65
4
Check the destinations and then touch
the [OK] key.
If the transmission includes Cc or Bcc destinations, touch the [Cc] tab or the [Bcc] tab to check those destinations.
To cancel a specified destination...
Touch the one touch-key of the destination that you wish to cancel. A message appears to confirm the cancelation.
Touch the [Yes] key.
☞
CHECKING AND DELETING THE SELECTED DESTINATIONS (page 27)
5
Press the [START] key ( ).
Scanning begins.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan each page one page at a time.
When scanning of one page finishes, replace it with the next page and press the [START] key ( ). Repeat until all pages
have been scanned and then touch the [Read-End] key.
A beep will sound to indicate that scanning is finished.
If Internet fax or fax destinations are included in the broadcast transmission, scanning will take place in Mono2.
To cancel scanning...
Press the [STOP] key (
) to cancel the operation.
• A broadcast transmission can be used in combination with the timer transmission function to transmit at night or any other
desired time.
• Fax mode:
Only memory transmission mode can be used for a fax broadcast transmission.
System Settings (Administrator): Fax Dest. Confirmation Mode
When this function is enabled, broadcast transmissions that include fax destinations cannot be performed.
To
001
003
005
007
009
011
002
004
006
008
010
012
Cc
1
2
Address Review OK
AAA AAA
KKK KKK
MMM MMM
OOO OOO
QQQ QQQ
SSS SSS
BBB BBB
LLL LLL
NNN NNN
PPP PPP
RRR RRR
TTT TTT