Sharp MX-M850 - Manual (Page 584)

14
* When a saddle stitch finisher or saddle unit is installed.
■ Network Settings
● Other Settings 47
X Copy Exposure Adjustment 5 47
X Rotation Copy Setting Enabled 47
X Add or Change Extra Preset Ratios – 47
X Setting a Maximum Number of Copies 9999 47
X Initial Margin Shift Setting
47 ‹ Side 1 1/2"
‹ Side 2 1/2"
X Erase Width Adjustment
47 ‹ Edge Clearance Width 1/2"
‹ Center Clearance Width 1/2"
X Card Shot Settings
47 ‹ Original Size X: 3-3/8", Y: 2-1/8"
‹ Fit to Page Disabled
X Automatic Saddle Stitch * Enabled 47
X Initial Tab Copy Setting 1/2" 48
X Disabling Deletion of Job Programs Disabled 48
X Disabling of Bypass-Tray in Duplex Copy Disabled 48
X Disabling of Auto Paper Selection Disabled 48
X Auto Selection Setting of Tray that is Supplied the Paper Disabled 48
X 600dpi x 600dpi Scanning Mode for Document Feeder Disabled 48
X Quick Scan from Document Glass Enabled 48
Item Factory default setting Page
■
Network Settings
49
● IP Address Setting DHCP 49
●
Enable TCP/IP Enabled 49
● Enable NetWare Enabled 49
●
Enable EtherTalk Enabled 50
● Enable NetBEUI Enabled 50
●
Reset the NIC – 50
● Ping Command – 50
Item Factory default setting Page