Sharp MX-M850 - Manual (Page 220)

124
INTERRUPTING A COPY RUN
(Interrupt copy)
When you need to make an urgent copy and the machine is busy with a long copy run or other job, use interrupt copy.
Interrupt copy temporarily stops the job in progress and lets you perform the interrupt copy job first.
1
Touch the [Interrupt] key.
The [Interrupt] key does not appear while an original is being
scanned.
2
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
3
Select copy settings and press the [START] key ( ).
The interrupt copy job begins.
4
When the interrupt copy job is completed, the interrupted job resumes.
To cancel scanning and copying...
Press the [STOP] key (
).
• If user authentication is enabled, the login screen will appear when the [Interrupt] key is pressed. Enter your user name
and password to log in. The number of copies made will be added to the count of the user that logged in.
• Depending on the settings of the job in progress, the [Interrupt] key may not appear.
• Interrupt copy cannot be used in combination with the Proof Copy and the following special modes:
Job Build, Tandem Copy, Book Copy, Card Shot, Multi-Page Enlargement
• If the document glass is used for an interrupt copy job, 2-sided copying, sort copying, and staple sort copying cannot be
selected. If any of these functions are necessary, use the automatic document feeder.
Copies in progress from tray 2.
Ready to scan for next copy job. 7 Interrupt
Special Modes
Plain
2-Sided Copy
Output
File
Quick File
Copy Ratio
1. 2.
7.
8½x11 8½x11
Original Paper Select
Auto
8½x11
Plain
Auto
Exposure
Auto
8½x14 4.
11x17
11x17
6.
11x17
5.
11x17
3.
8½x11
100%
Plain
Plain