Sharp MX-M850 - Manual (Page 81)

81
PAPER TYPE REGISTRATION
Store a paper type when the desired paper type does not appear as a selection or when you wish to create a new set of
paper properties.
Up to 10 paper types can be stored.
AUTO TRAY SWITCHING
When a tray runs out of paper during printing, this determines whether or not another tray with the same size and type of
paper is automatically selected and printing continues.
USB-DEVICE CHECK
This lets you check the connection when a USB device is connected to the machine. Touch the [USB-Device Check] key
to use this function.
Item Description
Type Name
Store any name.
The factory default names are "User Type 1" - "User Type 10".
Fixed Paper Side Enable this setting when paper with a front and reverse side is used.
Disable Duplex Enable this setting when paper is loaded that cannot used for two-sided printing.
Disable Reverse Enable this setting when you are using paper that cannot be turned over.
Disable Staple Enable this setting when paper is used that cannot be stapled.
Disable Punch Enable this setting when paper is used that cannot be punched.
Disable Fold Enable this setting when you are using paper that cannot be folded.
The settings that can be selected vary depending on the peripheral devices installed.
The status of a USB device that is not compatible with the machine will not appear.