Sharp MX-M850 - Manual (Page 585)

15
■ Printer Settings
*1 When the printer expansion kit is installed.
*2 When a bypass tray is installed.
■ Image Send Settings
Item Factory default setting Page
■ Printer Settings * 1 51
●
Default Settings 51
X Prohibit Notice Page Printing Enabled 51
X Prohibit Test Page Printing Disabled 51
X A4/Letter Size Auto Change Disabled 51
X Print Density Level 3 51
X Bypass Tray Settings * 2 51
‹ Enable Detected Paper Size in Bypass Tray Disabled 51
‹ Enable Selected Paper Type in Bypass Tray Enabled 51
‹ Exclude Bypass-Tray from Auto Paper Select Disabled 51
X Job Spool Queuing Enabled 51
● Interface Settings 52
X Hexadecimal Dump Mode Disabled 52
X I/O Timeout 60 sec. 52
X Enable USB Port Enabled 52
X USB Port Emulation Switching Auto 52
X Enable Network Port Enabled 52
X Network Port Emulation Switching Auto 52
X Port Switching Method Switch at End of Job 52
Item Factory default setting Page
■ Image Send Settings
53
●
Operation Settings 53
X Other Settings 53
‹ Default Display Settings Varies depending on the machine
configuration
53 • Hold settings for a while after scanning has been
completed
Disabled
• Switch Automatically to Copy Mode Screen Enabled
‹ Address Book Default Selection
53 • Tab Switch ABC
• Address Type All