Sharp MX-M850 - Manual (Page 218)

122
3
Set the number of copies (number of
sets) with the numeric keys.
If you will copy multiple originals using the document glass,
switch to sort mode after this step.
☞
SORT MODE (page 35)
Up to 9999 copies (sets) can be set.
If an incorrect number of copies is set...
Press the [CLEAR] key (
) and then enter the correct number.
4
Press the [PROOF COPY] key ( ).
One set of copies is printed.
To cancel copying...
Press the [STOP] key (
).
5
Check the printed set of copies. If the
copies are acceptable, press the
[START] key (
). If you need to change
the settings, touch the [Change] key.
When the [START] key ( ) is pressed, the remaining sets are
printed.
If you touched the [Change] key, go to the next step.
To cancel copying...
Press the [STOP] key (
).
6
Change the settings.
(1) Touch the key of the setting that you want
to change.
The setting screen of the touched key opens. Change the
settings and touch the [OK] key.
(2) Touch the [OK] key.
• To change the number of sets printed, set the desired number of copies (sets) with the numeric keys. After changing
the number of sets, press the [START] key ( ) (not the [PROOF COPY] key ( )) to print the sets.
• Special modes that can be adjusted are Margin Shift, Pamphlet Copy, Tandem Copy, Covers/Inserts, Transparency
Inserts, Multi-Shot, and Stamp.
• For Pamphlet Copy, Covers/Inserts, and Multi Shot, only changes to the settings of the functions can be made; the
functions cannot be newly added or deleted.
7
Plain
8½x11
Special Modes
2-Sided Copy
5.
PROOF COPY
Change
Press [Start] to continue.
To make a proof copy again, press
[Proof Copy].
Paper Select 2-Sided Copy
Special Modes Output
OK Proof Copy
PROOF COPY