Sharp MX-M850 - Manual (Page 633)

63
Default Exposure Settings
Default exposure settings for document filing can be
configured. Select [Auto] or [Manual]. If you select
[Manual], set the exposure to one of 5 levels.
Default Original Image Type
Select the original type beforehand to enable scanning
at a resolution suitable for the original.
The settings are shown below.
• Text/Printed Photo
• Text/Photo
• Text
• Printed Photo*
• Photo*
• Map*
* Does not appear when the exposure is set to [Auto].
Moiré Reduction
This reduces the moiré effect (line pattern) that occurs
when printed matter is scanned.
Initial Resolution Settings
One of the following resolutions can be selected for the
default resolution for Scan to HDD.
• 100X100 dpi
• 200X200 dpi
• 300X300 dpi
• 400X400 dpi
• 600X600 dpi
Color Data Compression Ratio
Setting
(When the color expansion kit is installed.)
[Low], [Medium], or [High] can be selected for the default
compression ratio for color files stored by Scan to HDD.
Scan Complete Sound Setting
This setting adjusts the volume of the beep that sounds
when scanning ends. The beep can also be turned off.
Default Output Tray
(When a saddle stitch finisher or finisher is
installed.)
"Top Tray" or "Offset Tray" can be selected for the
default output tray for printing files saved using Scan to
HDD.
Disable Stamp for Reprinting
When a stored file is retrieved and printed, this setting
prohibits the selection of a "Stamp" setting in the special
modes. If a stamp setting is already selected, it will not
be possible to change the stamp setting.
This function can be used to prevent inconsistencies in
the printed information, such as that of the original date
in the file and the date the file is retrieved and printed.
Batch Print Settings
When printing files by batch printing, this setting is used
to prohibit the selection of the [All Users] key and the
[User Unknown] key in the user selection screen.