Kathrein UFS 822sw - Manual (Page 116)

116
INSTALLATION MENU
TUNER 1 SETUP
Antenna Number:
Each tuner can receive from up to four satellites. Use the

buttons to select the position to which you
want to assign a new or different satellite.
Satellite Name:
Press the button to access the list of available satellites. Select the satellite you want using the

buttons and confi rm your selection with the button. Make sure your reception system is aligned
to the selected satellite.
LNB Frequency:
Use the

buttons to select the LNB frequency applicable to your reception system or press
the button to view the same listing as on First installation, containing the most common variants as
follows:
- Single (LNB Low frequency 9750 MHz)
- Dual (LNB Low frequency 9750 MHz and LNB High frequency 10,600 MHz)
- Universal (LNB Low frequency 9750 MHz and LNB High frequency 10,600 MHz and Limit frequency
11,700 MHz)
Press the

buttons to make your selection. To confi rm your selection press the

buttons to
select “OK” and press the button.
22kHz Control:
Press the

buttons to make your selection (On/Off). The 22kHz Control is needed to switch LNBs in
multi-feed reception and to switch between Low and High band.