Kathrein UFS 822sw - Manual (Page 48)

48
Press the button to access the “Ethernet Setup” menu. The following display appears (example):
ETHERNET SETUP
Press the

buttons to select whether or not the receiver should display the radio text when in
radio mode (this option is available only from software version 1.2).
RADIO TEXT
SYSTEM SETUP
If you wish to connect your receiver to a DHCP server, use the

buttons to select the “On” setting.
If you wish to connect your receiver to a PC or laptop, the DHCP setting must be “Off”.
These settings should not be made
unless the receiver is linked into a
network or is linked to a PC/laptop
using a crossed over network cable.
The Ethernet interface used in the
receiver is a 10/100 base T Ethernet
interface.