Kathrein UFS 822sw - Manual (Page 18)

18
Press the

buttons and the button to
select the satellites from which you want tuners 1
and 2 to receive signals. Press the button to
confi rm your selection; the chosen satellite is then
moved into the tuner satellite list on the right.
If you have unintentionally transferred a satellite
into the list on the right, you can press the
"
(yellow) button to switch between the lists, and
then press the button to remove the satellite
concerned.
When you have selected all the satellites you want,
press the
!
(green) button.
Press the

buttons and the to select the
satellites you want tuner 1 to receive signals from.
Press the button to confi rm your selection;
the chosen satellite is then moved into the tuner
satellite list on the right.
If you have unintentionally transferred a satellite
into the list on the right, you can press the
"
(yellow) button to switch between the lists, and
then press the button to remove the satellite
concerned.
When you have selected all the satellites you want,
press the
!
(green) button.
FIRST INSTALLATION
Signal confi guration
“As for tuner 1”
Signal confi guration
“Different from tuner 1”
Press the
#
(blue) button to view the satellites by continent; that is, which satellites are accessible on which
continent. The continents are displayed above the list of satellite names. The selected continent is shown
in yellow.
The satellites from the pre-programmed channel list are automatically pre-entered in the right-hand column,
and can be changed/deleted according to your reception system.