Kathrein UFS 822sw - Manual (Page 121)

121
Video PID (Packet Identifi cation Number):
Use the numeric pad on your remote control to key in the video PID (Packet Identifi cation Number)
identifying the video data of the new channel you want on the transponder.
Audio-PID (Packet Identifi cation Number):
Use the numeric pad on your remote control to key in the audio PID of the desired new channel,
identifying the audio data of the channel on the transponder.
PCR-PID (Program Clock Reference-Packet Identifi cation Number):
Use the numeric pad on your remote control to enter the PCR PID of the desired new channel here.
It is normally identical to the video PID.
Start Search:
When you have made your selection, use the

buttons to select “Start Search” and press
the button to start the search.
INSTALLATION MENU
If the search is successful, you see the following message (example):
MOTORIZED ANTENNA
Only make changes to this menu when settings or circumstances on/relating to
your reception system have changed. The settings should be made by a specialist
engineer.