Kathrein UFS 822sw - Manual (Page 129)

129
SOFTWARE AND PROGRAMME LIST UPDATE
The transponder information “Frequency” and “Symbol Rate” are displayed here.
The current software version is displayed here.
Use the

buttons to select whether you want to download the latest information text. The
information text is displayed during the software download, providing details of the new features offered by
the software update.
Use the

buttons to select whether you want to download the latest channel list.
The software currently available on the transponder is displayed here. Compare the version with the one
listed under “Current Software Version”. If the version on the transponder is higher than the current version
on the receiver, use the

buttons to select whether you want to download the latest software.
When you have made all the settings, press the button here to start the download. The following
display appears (see next page):
Note: If you are not sure whether you want to download new software to your receiver, you
can fi rst activate the “information text” and then start the download. Only the information
text is displayed. If you want the changes the new software offers, you can then still run
the download as described above.
TRANSPONDER INFO
CURRENT SW VERSION
DOWNLOAD INFORMATION TEXT
CHANNEL LIST UPDATE
UPDATE OPERATING SOFTWARE
START DOWNLOADING