Kathrein UFS 822sw - Manual (Page 38)

38
SYSTEM SETUP
Select the type of video signal at the Scart socket here. Select the signal that your TV set can process.
Refer to the operating instructions for your television set!
• FBAS – composite colour baseband signal
(colour/picture/blanking/synchronisation
signal)
• RGB – Red/Green/Blue signal or
• Y/C – S-Video signal (luminance/chrominance)
• YUV – component data
VIDEO OUTPUT
Select the type of audio signal at the Scart socket here:
• Stereo – Left and right side audio channel
• Mono left – Left side audio channel only
• Mono right – Right side audio channel only
You will need to select further audio settings for the specifi c channel (such as Dolby Digital playback)
directly on the TV screen using the
"
(yellow) button.
AUDIO OUTPUT
TV SETTINGS
AV SETTINGS
Press the button to access the “TV Settings” menu. The following screen appears: