Kathrein UFS 822sw - Manual (Page 77)

77
Example of user-defi ned recording:
Example of series recording:
Note: If every episode of a series is programmed to be recorded using the “Series recording”
function, the
EPG locates the series in question in the updated schedules and
automatically programmes recording of them. A change in the time the series is broadcast
is no problem for the
EPG, as its programming is based on the series title.
This does, however, mean that the schedule change needs to have been notifi ed prior
to the last update of the
EPG.
TVTV EPG AND TIMER
DIRECT DECODING OF TVTV TIMERS
If two timers are set for encrypted channels, both with decoding set to “On”, and
the recording times overlap, the fi rst timer will record decoded and the second
timer will record encrypted. The unit cannot make two decoded recordings at
the same time (the fi rst programme will be recorded decoded and the second
programme will be recorded encrypted). If two timers are set for encrypted
channels, both with decoding set to “On”, and the recoding times do not
overlap, both timers will record decoded. During decoded recording, the only
channels that can be viewed are other channels from that same transponder.
The last decoding option selected remains in effect until changed.