Kathrein UFS 822sw - Manual (Page 118)

118
INSTALLATION MENU
AUTOMATIC SEARCH
Network Search:
Use the

buttons to select the setting for the network search.
If you set the network scan to “On”, the transponder network enables additional transponders that have
not yet been stored to be located. They are then stored and searched for new channels in the same way
as the existing transponders.
If you set the network search to “Off”, only the current stored transponders of the satellites you previously
selected will be scanned for new as yet unlisted channels.
FTA CA Select:
Use the

buttons to select whether you want to search through all channels or only
FTA (Free to Air) or CA (Conditional Access) channels (Common Interface “encrypted channels”).
Start Search:
When you have made your selection, use the

buttons to select “Start Search” and press
the button to start the search.