First installation – Kathrein UFS 822sw User Manual
Page 20
20
FIRST INSTALLATION
22kHz Control:
Press the
buttons to make your selection
(On/Off). The 22kHz Control is needed to switch
LNBs in multi-feed reception and to switch between
Low and High band.
DiSEqC™ input:
Press the
buttons to make your selection.
- 1 of 4: for the fi rst satellite of the tuner
- 2 of 4: for the second satellite of the tuner
- 3 of 4: for the third satellite of the tuner
- 4 of 4: for the fourth satellite of the tuner
- Mini A: Tone-burst control signal 1 for the fi rst
satellite of the tuner (if reception system not
DiSEqC™-compatible)
- Mini B: Tone-burst control signal 2 for the
second satellite of the tuner (if reception system
not DiSEqC™-compatible)
- Disable: If your reception system is not
DiSEqC™-compatible and only one satellite
per tuner is selected.
22kHz Control:
Press the
buttons to make your selection
(On/Off). The 22kHz Control is needed to switch
LNBs in multi-feed reception and to switch between
Low and High band.
DiSEqC™ input:
Press the
buttons to make your selection.
- 1 of 4: for the fi rst satellite of the tuner
- 2 of 4: for the second satellite of the tuner
- 3 of 4: for the third satellite of the tuner
- 4 of 4: for the fourth satellite of the tuner
- Mini A: Tone-burst control signal 1 for the fi rst
satellite of the tuner (if reception system not
DiSEqC™-compatible)
- Mini B: Tone-burst control signal 2 for the
second satellite of the tuner (if reception system
not DiSEqC™-compatible)
- Disable: If your reception system is not
DiSEqC™-compatible and only one satellite
per tuner is selected.