Kathrein UFS 822sw - Manual (Page 25)

25
- All: FTA (free-to-air) and encoded channels are searched for
- Only FTA channels: Only non-encrypted channels, such as ZDF in Germany, are searched for
- Only encrypted channels: Only encrypted channels, such as Austria's ORF, are searched for
Perform the settings by pressing the
 
buttons.
Channel Search
Press the

buttons to select whether you want to use the factory default channel list or whether you
want to search for more/new channels.
FTA CA Select:
FIRST INSTALLATION
The notes on First installation are unifi ed once again from this point!
Network scan
If you set the network search to “Off”, only the factory stored transponders of the satellites you previously
selected will be scanned for new as yet unlisted channels.
If you set the network scan to “On”, the transponder network enables additional transponders that have not
yet been stored to be located. They are then stored and searched for new channels in the same way as the
existing transponders.
Press the
!
(green) button to start the channel search, or if you set the channel search to “Off” you are
guided straight to the next item in the First installation process.
Encrypted channels can be decoded only by using a CA module and corresponding
smart card. CA modules and smart cards are not supplied with this product. Please
contact your respective Pay-TV supplier.