Kathrein UFS 822sw - Manual (Page 74)

74
When you call up additional information in
the EPG using the button, you will be
shown only the fi rst page of description of
the programme.
To obtain the full information on the
programme, set the item “EPG Grabbing”
in the “User Preference”/”EPG Setup”
menu to “Off”. The tvtv data will be deleted
and not collected again.
You now can use the full extent of the SI
data sent by the programme provider in
the EPG.
In order to use the tvtv EPG again, you
must restore the item “EPG Grabbing” in
the “User Preference”/”EPG Setup” menu
to “On”. In the selection fi eld “EPG Grabbing Time” you can set a specifi c time of day for updating the tvtv
data. To update the tvtv EPG data immediately, press the

button to switch the receiver to standby
mode.
Use the

buttons to scroll up and down the various pages of detailed information. The third page
displays the upcoming episodes (such as of a series; see example):
TVTV EPG AND TIMER
Press the button in the EPG to call up details on the selected programme. The information
is only available if the symbol is displayed next to the programme title. The symbol only appears
once you have selected the channel and programme by highlighting it with the yellow cursor bar in the
various views of the
EPG however.
When you press the button the following display appears (example):
DETAILED INFORMATION
If further episodes are available (see example), you can display them by pressing the

“More Episodes”
button. To record a following episode see “Programming a Recording”.