Tvtv epg and timer, Important additional information key to symbols – Kathrein UFS 822sw User Manual

Page 79

Advertising
background image

79

• The



button does not become active until 15-20 seconds after the picture appears on the TV.

• Updating of the

EPG is only started if the

EPG data is more than 36 hours old.

• The

EPG is broadcast over the ASTRA satellite at the frequency of 12,603.75 MHz, with

a symbol rate of 22 MSymb/s and horizontal polarisation (18 V). If you have accidentally deleted
the transponder at this frequency, you will need to start a new satellite and transponder scan for
the ASTRA satellite (see “Channel Search”).

• Digital-compatible single-cable solutions, such as “Technisat DisiCon 4 LNB”, do not permit

transmission of the

EPG data, because the necessary transponder (12,603.75 MHz, symbol

rate 22 MSymb/s, horizontal) is not transmitted in that system. This transponder must not be deleted,
as the

EPG data is transmitted on it.

Symbol

Explanation

Widescreen format

Programme broadcast in black-and-white

Dolby Digital 5.1 is a sound transmission method enabling digital
surround sound to be reproduced on a home cinema system

Dolby Surround

Subtitles for the hard-of-hearing

Mono

Stereo

Two-channel sound (e.g. multiple languages available)

Daily highlight tips

Programme details

Recurring programme recording (series)

Programme scheduled for recording

TVTV EPG AND TIMER

IMPORTANT ADDITIONAL INFORMATION

KEY TO SYMBOLS

Advertising
This manual is related to the following products: