Kathrein UFS 822sw - Manual (Page 131)

131
SOFTWARE AND PROGRAMME LIST UPDATE
Follow all on-screen instructions!
Check the time setting following a software update!
You can also download the updates from the Internet. The address is:
http://www.kathrein.de
You will fi nd the software under “Service” → “Software and Download” → “Receiver” →
“UFS 822”
You can install these updates by way of the PVR Manager.
Once the update is complete, the receiver is re-initialised and starts operation again. Never turn
off the receiver during the update process, as otherwise you could lose the entire software.
If this happened, the receiver would have to be re-installed at a workshop or using a PC and
USB cable. On the “STB Management” - “System Information” menu you can see whether the
new software has been installed.
Use the

buttons to select “OK“ and launch updating by pressing the button. The following display
appears: fi rst “Er.xxx” and then “Wr xxx”. Once the update has been completely transferred to the receiver,
the message “Complete” is displayed.