Kathrein UFS 822sw - Manual (Page 83)

83
RECORDING
The UFS 822 offers you the following options for recording a programme:
- Timeshift
Allowing you to include the background recordings made up to that point to be included in your
recording
- Record direct to hard disk
Allowing you to start recording immediately or later
- Timer recording (see tvtv EPG)
Allowing you to coordinate your recordings and plan them well ahead, also providing a range of options
such as the series timer
The UFS 822 offers you a special feature in this context. As soon as you switch to a channel, the receiver
automatically starts recording the programme you are viewing to the hard disk in the background.
When you change channel again, the stored data is deleted and background recording begins again.
If, after viewing the programme for a time, you decide you want to record it, you can do so as from the
point you switched to the channel in question.
Pre-requirement: On the “PVR Setup” menu the “Automatic Timeshift” option must be set to “On”
and the “Timeshift Buffer Size” entry must allow suffi cient hard disk capacity for the
timeshift recording.
Also refer to the “User Preference” section on this, under “PVR Setup”.
Start
Press the

(red) button. The following screen appears:
RECORDING DIRECT TO HARD DISK (STORE TIMESHIFT RECORDING)
Check that there is adequate hard disk capacity available before every recording!
You can see this on the right-hand side of the “Recording List” menu, indicated
as “Disk Usage”. It is impossible to say exactly how much storage space a
recording will take up, as this depends on the volume of data content transmitted.
You can work on a basis of about 1.5 GB for one hour's recording.