Kodak 9500 - Manual (Page 103)

A-61092 September 1999 8-37
Using the Patch Reader
The Patch Reader controls document level changes by automatically
sensing a predefined patch code and changing the document level
accordingly.
During installation, modes are defined for use with specific applications.
Patch reading may be enabled or disabled for each mode.
Patch types During installation, the patch type(s) used are defined for each mode.
The Patch Reader is capable of reading three types of patches.
Patch III — assigns a Level 3 to the current document.
Patch II — assigns a Level 2 to the current document.
Patch T/Transfer Patch — assigns a predetermined level to the next
document.
The Transfer Patch Definition is also defined at installation. The Transfer
Patch Definition controls the level assigned to the next document when a
Transfer Patch is used. For example, if the Transfer Patch Definition for
the current mode is defined as Level 3 and a Transfer Patch is used, the
next document will be assigned Level 3.