Kodak 9500 - Manual (Page 20)

A-61092 September 1999 2-9
Changing the
deflector The scanner comes with two deflectors (stored in the pocket located
inside the right-side access door), designed to help stack the
documents as they exit the transport system and enter the exit hopper.
Use the short deflector for documents less than 5 in. (13 cm) and the
long deflector for documents longer than 5 in. (13 cm) as well as for
mixed sizes.
Short document deflector
Holding clip
Long document deflector
Deflector
Front cover
(does not have to
be open to attach
deflectors)
(Swings to right)
Attachment pin
1. Grasp the deflector near the attachment pin (as shown).
Lip of exit hopper
Deflector
(black side must be down)
2. Guide the deflector into the exit hopper, just below the lip of the
hopper, to insert the attachment pin in the holding clip.
3. Pull the deflector toward you until it clicks into place.