Kodak 9500 - Manual (Page 108)

A-2 A-61092 September 1999
•
Assume that in Mode 12:
−
The index format is three-level.
−
The image address Level 3 field length is 2 characters; the
image address Level 2 field length is 2 characters; the image
address Level 1 field length is 5 characters.
−
The level rules are: Level 1 followed by Level 2; Level 2 followed
by Level 2; and Level 3 followed by Level 2.
•
Assume that in Mode 14:
−
The index format is three-level.
−
The image address Level 3 field length is 2 characters; the
image address Level 2 field length is 2 characters; the image
address Level 1 field length is 5 characters.
−
The level rules are: Level 1 followed by Level 1; Level 2 followed
by Level 1; and Level 3 followed by Level 2.
Mode 10 and Mode 12 may not be linked; the image address field
lengths are not the same.
Mode 10 and Mode 14 may not be linked; the image address field
lengths are not the same.
Mode 12 and Mode 14 may be linked; the index format is three-level;
and the image address has three fields, each with the same length.
NOTE: If you are currently in Mode 12 and want to change to Mode 14,
note the affect of different level rules on the image address.
Assume that the image address of the last document fed into
the transport is 01.05.01234. The next image address displayed
while still in Mode 12 is 01.06.00000. However, if you change to
Mode 14, using function code F91, the next image address
displayed in Mode 14 is 01.05.01234.
Image addresses An image address is assigned to every document scanned. An image
address is composed of four fields, each representing a different
document level. An image address has a maximum length of 15
characters; 12 alphanumerics (field A, field B, and field C must be
numeric; the fixed field may contain alphanumerics) and 3 delimiters
(inserted between fields).
The image address (number of fields and characters) is based on the
indexing scheme chosen (refer to the section entitled “Indexing
schemes” later in this appendix).