Kodak 9500 - Manual (Page 47)

5-12 A-61092 September 1999
Replacement
procedures
Replacement procedures should be performed on an as-needed basis.
Components that need periodic replacement include the air filter,
exposure lamps and the imaging guides.
Replacing the air filter
The air filter should be replaced at least once a year, more often if
needed.
IMPORTANT: Never operate the scanner without an air filter installed.
The imaging apparatus will quickly become
contaminated with dust and dirt, impairing image quality.
1. Remove the air filter cover by pressing in on the top of the cover to
release the catch.
Catch
Air filter cover
Air filter
2. Carefully remove the old air filter. Note the orientation of the filter
as it is removed from the machine.
3. Orient a new air filter the same as the old air filter, and insert it into
the space left open by the old air filter.
4. Replace the air filter cover by first inserting the bottom edge and
then pushing the top edge in place.