Kodak 9500 - Manual (Page 52)

A-61092 September 1999 5-17
Replacing the separator roller:
1. Open the front cover.
2. Push the roller cover release lever toward the back of the machine.
3. Grasp and rotate the roller cover toward the back of the machine,
exposing the feeder module and separator roller.
4. Lift and remove the separator roller cover plate.
5. Lift the separator roller out of the grooved brackets.
6. Reinsert a new separator roller by aligning the pins in the grooved
brackets.
7. Reinsert the separator roller cover plate.
8. Close the feeder cover.
9. Close the front door.
Roller cover
Feeder module
Roller cover
release lever
Separator roller
Grooved brackets