Kodak 9500 - Manual (Page 7)

1-4 A-61092 September 1999
Rear view
J30 J31 J45 J32 J33 J46
ON
OFF
Not Used
Computer
interface 1
(COIN 1) Computer
interface 2
(COIN 2) Computer
interface 3
(COIN 3)
SCSI ports
Power
cord
Main power switch
Computer interface 1 (COIN1) — service/diagnostic interface.
Configures the scanner and runs diagnostics.
Computer interface 2 (COIN2) — bar code interface. Transfers
commands between the scanner and external devices/subsystems.
Computer interface 3 (COIN3) — SCSI diagnostic port interface.
System debugging and monitoring SCSI-host computer
communications.
SCSI ports — SCSI interface connection for the scanner.
Power cord — plugs into an appropriate power outlet.
Main power switch — turns main power to the scanner on and off.