Kodak 9500 - Manual (Page 98)

8-30 A-61092 September 1999
Setting the date
and code number To set the date and code number:
1. Open the top cover.
2. Push down the locking lever.
3. Press down on and hold the latch to unlock the Endorser.
4. Rotate the Endorser toward the back of the unit.
NOTE: The index plate contains markings which identify the date
characters and the code numbers.
5. Slide the date knob out to the left until the colored band on the knob
is opposite the appropriate mark on the index plate.
6. Rotate the date knob clockwise or counterclockwise to set the month,
day, year, or code number required for endorsing.
Endorser
Latch
Locking
lever
(Endorser rotates
to the right)
Date knob
Colored
band
Stamp
Index
Plate