Kodak 9500 User Manual

Page 35

Advertising
background image

4-10

A-61092 September 1999

Code

Function Code Name

Description

F72

Skew Detection

Allows you to turn skew detection on or off which monitors
the amount of skew using predefined skew angle(s).
Enter 1 to turn on or 0 to turn off, then press Enter.

F73

Latched Scanning Flag

Allows you to set a flag in the image headers which alerts
the host system that this document, and those which
follow, are of special interest. The flag will remain
activated for every document until it is turned off. Enter 1
to turn on or 0 to turn off, then press Enter.

F74

Momentary Scanning Flag

Allows you to set a flag in the image header which alerts
the host system that this document is of special interest.
This flag is set only for that one document. Enter 1 to turn
the momentary scanning flag on, then press Enter.

F75

Footswitch Confirmation
Tone

Allows you to turn the confirmation tone on or off which
informs you when the Footswitch is pressed and/or
released. Enter 1 to turn on or 0 to turn off, then press
Enter.

F91

Select Linked Mode

Allows you to switch from one application mode to
another, keeping the last image address. Enter the
number of the application mode you wish to select, then
press Enter.

F92

Fixed Field

Allows you to enter a new fixed field value containing
alphanumeric characters.

NOTE:

If the fixed field width for the mode you are using
is 0, and E104 error will be displayed. To correct
this, change to a mode that has a fixed field or
modify the mode you are using so the fixed field
is not 0.

F93

Action/Confirmation Tone

Allows you to hear the pitch of the alarm tone.

F94

Level 1

Allows you to assign Level 1 to the next document fed into
the transport.

F95

Level 2

Allows you to assign Level 2 to the next document fed into
the transport.

F96

Level 3

Allows you to assign Level 3 to the next document fed into
the transport.

F97

Next Image Address

Allows you to input the next image address. Enter the
next image address, then press Enter.

F98

Stop

Allows you to stop the transport.

F99

Run

Allows you to turn on the transport.

Advertising