Konica Minolta C250P - Manual (Page 105)

Setting up the printer driver 2
C250P 2-42
5
Specify settings for the following:
– SMB Print: Set whether to use the SMB printing service. Select
“ON” here.
– NetBIOS Name: Specify the NetBIOS name (up to 15 characters,
including the following: -).
– Print Service Name: Specify the printing service name (up to 12
characters, excluding the following: / \).
– Work Group: Specify the work group name (up to 15 characters, ex-
cluding the following: " \ ; : , * < > | + = ?).
6
To apply the settings, restart this machine (turn it off, then on again).
2
Reminder
When turning the power switch OFF then ON, wait for 10 seconds or
longer before turning it ON again; otherwise the machine may not func-
tion normally.