Konica Minolta C250P - Manual (Page 18)

Introduction
C250P x-17
Explanation of manual conventions
1 Press the [Menu/Select] key.
The settings menu ap-
pears.
2 Press the [ ↑ ] and [ ↓ ] keys until User Setting appears.
Replacing Toner Cartridges and Staples and Emptying Waste Containers
Chap
ter
9
Replacing Toner Cartridges and Staples and Emptying Waste Containers 9
C250P
9.1 Replacing the Toner Cartridge
Note
When the message appears, replace the toner cartridge according to
your maintenance agreement.
Reminder
Do not replace the toner cartridge until the message Replace the Toner
Cartridge. appears. In addition, do not replace the toner cartridge of any
color other than the one indicated in the message on the control panel.
Detail
About 1000 (A4) pages can be printed after the message Toner Car-
tridge (X) needs to be replaced soon. appears.
CAUTION
Metallic parts on the inside of the upper cover are very hot.
Touching any part other than the paper may result in
burns.
When the toner is about to run out, the advanced warning message shown
below appears.
Example: Message when the yellow toner is about to run out
9-2
Titles indicate the contents of the section.
Screens are shown so that the
actual display can be checked.
Note
Text highlighted in this manner
contains references and supplemental
information concerning operating
procedures and other descriptions.
We recommend that this information
be read carefully.
(The page shown above is an example only.)
Text highlighted in this manner indicates precautions to ensure safe use of this machine.
"Warning" indicates instructions that, when not observed, may result in fatal or critical injuries.
"Caution" indicates instructions that, when not observed, may result in serious injuries or
property damage.
WARNING , CAUTION
Text highlighted in this manner
provides more detailed information
concerning operating procedures or
references to sections containing
additional information. If necessary,
refer to the indicated sections.
Detail
Reminder
Text highlighted in this manner
indicates operation precautions.
Carefully read and observe this
type of information.
[ ]
Names highlighted as shown above
indicate keys on the control panel
and buttons in application windows
and dialog boxes.