Konica Minolta C250P - Manual (Page 475)

Appendix 10
C250P 10-2
10 Appendix
10.1 Specifications
bizhub C250P
Specifications
Type Freestanding printer
Photoconductor OPC
Developing system HMT developing method (HMT-OR)
Fusing system Roller fixing
Paper Plain paper (17 to 24 lb), thick paper 1 (24-1/4 to 40 lb)*, thick
paper 2 (40-1/4 to 55-1/2 lb)*, thick paper 3 (55-3/4 to 68 lb)*
overhead projector transparencies*,
letterheads, colored paper, envelopes*, label sheets*,
banner paper (33-3/4 lb to 42-1/2 lb)**
* Can only be fed through the Tray 1 or the bypass tray
** Can only be fed through the bypass tray
Print sizes Tray 1:
11 × 17 w to 5-1/2 × 8-1/2 w/v, 12-1/4 × 18 w (A3 Wide),
A3 w to B6 w, A6 w, 8 × 13 w
*1
Width: 3-1/2 to 12-1/4; Length: 5-1/2 to 18
Tray 2:
A3 w to B5 w/v, 11 × 17 w to 8-1/2 × 11 w/v
Bypass tray:
11 × 17 w to 5-1/2 × 8-1/2 w/v, 12-1/4 × 18 w (A3 Wide),
Banner paper, A3 w to B6 w, A6 w, 8 × 13 w
*1
Width: 3-1/2 to 12-1/4; Length: 5-1/2 to 18
Banner paper — Width: 8-1/4 to 11-3/4; Length: 18 to 47-1/4
Paper tray capacity Tray 1:
Plain paper: 250 sheets
Thick paper 1/2/3, overhead projector transparencies,
label sheets, envelopes: 20 sheets or less
Tray 2:
Plain paper: 500 sheets
Bypass tray:
Plain paper: 100 sheets
Thick paper 1/2/3, overhead projector transparencies,
label sheets envelopes: 10 sheets or less, banner paper: 1
sheet
Print exit tray capacity Plain paper: 350 sheets; Thick paper: 20 sheets; Overhead
projector transparencies: 1 sheet
Warm-up time Less than 110 seconds (at room temperature (73.4°F))
Image loss width Leading edge: 3/16; Trailing edge: 3/16; Rear edge: 3/16;
Front edge: 3/16
RAM 512 MB
Hard Disk (Option) 40 GB