Konica Minolta C250P - Manual (Page 471)

Additional settings 9
C250P 9-38
6
Place the paper to be printed on over the finisher and output tray.
7
From the computer, select the job to be printed, and then click “Print”
on the “File” menu.
8
Specify the desired settings, and then click the [OK] button.
9
Open the bypass tray.
10
With the side to be printed on facing down, insert the paper as much
as possible into the feed slot.
– Before loading the paper, check that the following message ap-
pears in the control panel.