Admin. setting, Admin. setting -38 – Konica Minolta C250P User Manual
Page 281
Control panel settings
4
C250P
4-38
Admin. Setting
This section describes the parameters and main settings that can be speci-
fied after pressing the [Menu/Select] key, then selecting “Admin. Setting”.
Network Setting
Parameters
Description
Initial Setting
TCP/IP
TCP/IP Setting
Select whether or not TCP/IP is
used.
ON
IP def. method
Select whether or not DHCP is used
to automatically acquire the IP ad-
dress.
If “Auto” is selected, specify wheth-
er or not “DHCP”, “BOOTP”, “ARP/
PING”, or “AUTO IP” is used to ac-
quire the IP address.
If “Direct” is selected, specify set-
tings for “IP Address”, “Subnet
Mask”, and “Default Gateway”.
Auto
DNS Server
Specify the DNS server settings.
—
DNS Auto Obtain
Select whether or not the DNS serv-
er is automatically acquired.
Enable
Priority DNS
Register the address of the DNS
server given priority.
—
Substitute DNS 1 & 2
Register the addresses of the alter-
nate DNS servers.
—
IP Filtering
Specify the settings for IP address
filtering.
—
RAW Port No.
Specify the RAW port number.
—
Host Name
Specify the host name.
—
DNS Domain Set
Specify the name of the DNS do-
main.
—
DNS Auto Obtain
Select whether or not the name of
the DNS domain is automatically
acquired.
Enable
Default Name
Register the default domain name.
—
Search Name 1, 2 & 3
Register the search domain name.
—
DNS Domain Set
Specify the domain name.
—
DynamicDNS Set
Select whether or not dynamic DNS
is enabled when the DNS server be-
ing used is compatible with dynamic
DNS functions.
—