Paper tray, Paper tray -32 – Konica Minolta C250P User Manual
Page 275
Control panel settings
4
C250P
4-32
Paper Tray
This section describes the parameters and main settings that can be speci-
fied after pressing the [Menu/Select] key, then selecting “Paper Tray”.
!
Detail
If “Custom Size” or “Oversized Paper” is selected as the paper size, the
exact size can be specified.
- If postcards were loaded, select “Thick 2”.
- If “A6 Card T” is selected, “Thick 2” is automatically selected. If paper
other than postcards is loaded, change the paper type setting.
Parameters
Description
Initial Setting
Tray 1 Size
Select the size of paper loaded in Tray 1.
8-1/2 × 11
Tray 1 Type
Select the type of paper loaded in Tray 1.
Normal
Tray 2 Type
Select the type of paper loaded in Tray 2.
Normal
Tray 3 Type
Select the type of paper loaded in Tray 3.
Normal
Tray 4 Type
Select the type of paper loaded in Tray 4.
Normal
Bypass Size
Select the size of paper loaded in the bypass
tray.
8-1/2 × 11
Bypass Type
Select the type of paper loaded in the bypass
tray.
Normal