Konica Minolta C250P - Manual (Page 202)

Specifying printer driver settings 3
C250P 3-69
Graphics tab
Device Options tab
To specify the following printer-specific options, right-click the printer icon in
the Printers window, and then click “Properties” in the menu that appeared.
Item Function
Resolution Specifies the print resolution.
Color Control Specifies whether to adjust the color to that on the screen.
Halftoning Specifies the halftone number of lines and the pattern angle.
Special Prints a negative or mirror image.
Scaling Specifies the enlargement and reduction ratio.
Item Function
Collated Specifies whether to print multiple copies in sets.
Offset When printing multiple copies, shifts the output position of each set.
Binding Position Specifies the binding position.
Duplex Specifies double-sided printing.
Combination Specifies booklet printing.
Staple Performs stapling.
Punch Performs hole punching.
Fold Performs folding.
Center Erase Does not print on the folded part of the center binding.
Front Cover Page Attaches a front cover page.
Paper Tray
(Front Cover Page) Selects the paper tray for the front cover.
Back Cover Page Attaches a back cover page.
Paper Tray
(Back Cover Page) Selects the paper tray for the back cover.
Transparency Interleave Inserts interleaves between overhead projector transparencies.
Paper Tray (Transparen-
cy Interleave) Selects the paper tray for the transparency interleaves.
Wait Mode Temporarily stops printing after part of the document has been print-
ed so that the proof print can be checked.
Select Color Specifies whether to print in color or grayscale.
Original Image Type Prints with a quality suitable for the original document.
Color Matching (Text) Adjusts the color quality of the text in a document.
Pure Black (Text) Specifies whether to print the text in a document in grayscale.
Screen (Text) Specifies screening of the text in a document.