Konica Minolta C250P - Manual (Page 433)

Troubleshooting 8
C250P 8-68
If any message other than those listed above appears, perform the operation
described in the message.
*1 For a message concerning the paper, the paper tray, paper size and paper
type are indicated as codes in the second line.
Example: T1: A4-R NRML
(For A4-R-sized plain paper in Tray 1)
The codes represent the following.
-
Trays
T1 to T4 (Tray 1 to Tray 4), BP (bypass tray), LC (LCT)
- Paper size
AO, AO-R, BO, BOx-R (“O” is replaced with a number that indicates the
paper size.)
LD (11 × 17), LG (Legal), LT (Letter), IV (Invoice), EX (7-1/4 × 10-1/2)
8K, 16K, 16K-R
OOW or OOWR (wide paper for each size), FR (custom size)
- Paper type
NRML (plain paper), 1SIDE (paper only for single-sided printing), OHP,
TH1 to TH3 (thick paper 1 to 3)
CP (colored paper), LTHD (letterhead), ENV (envelopes), and SP (special
paper)
Trouble C-xxxx Call
Service The machine malfunctioned
and is unable to make prints. Inform your technical representative
of the code displayed on the control
panel.
Message Cause Remedy