Konica Minolta C250P User Manual
Page 98
Setting up the printer driver
2
C250P
2-35
With Macintosh
You can print from your Macintosh computer using LPR, AppleTalk or Bon-
jour/Rendezvous.
You can connect this printing system to a print server in an AppleTalk or Bon-
jour/Rendezvous environment and send print jobs from the Macintosh com-
puter to this machine.
Network connection methods that can be selected in each Windows op-
erating system
This chapter describes the settings that must be specified for network print-
ing.
Setting procedures differ depending on the method of networking printing
used (SMB, LPR, or IPP printing). Select the best method of network printing
for your Windows environment.
Network printing from a Windows operating system
* When using Port 9100 printing under Windows 98SE or Windows Me, it may be necessary to
install the Peer to Peer Printing Tool. For details, refer to the table below.
Conditions when the Peer to Peer Printing Tool must be installed while using
Port 9100
Proto-
col Used
Win-
dows
98SE
Win-
dows
Me
Win-
dows
2000
Win-
dows XP
Win-
dows NT
4.0
Win-
dows
Server
2003
SMB Print-
ing
TCP/IP,
NetBEUI
o
o
o
o
o
LPR Printing
TCP/IP
o
o
o
o
IPP Printing
TCP/IP
o
o
o
Port 9100
Printing
TCP/IP
+*
+*
o
o
o
Operating System
Windows 98SE/Me
Windows 2000/XP/2003
Driver type
Using installer
Not using in-
staller
Using installer
Not using in-
staller
Konica Minolta
PCL
Not required
*1
Required
Not required
*4
Konica Minolta
PostScript
-
*2
PostScript PPD
-
*3
Required
-
*2