Konica Minolta C250P User Manual
Page 121
Setting up the printer driver
2
C250P
2-58
5
In Administrator mode of PageScope Web Connection, select “Net-
Ware Setting” from the Network tab, and then specify the following set-
tings.
–
IPX Setting: Select “ON”.
–
Ethernet Frame Type: Select “Auto Detect”. (Select the frame type
according to the network environment.)
–
NetWare Print Mode: Select “Nprinter/Rprinter”.
–
Printer Name: Specify the printer name.
–
Printer Number: Specify the printer number (0-255). When 255 is
specified, the setting is “Auto”.
6
Restart this machine (turn it off, then on again).
7
Use the NetWare server console to load PSERVER.NLM.
8
Use the NetWare server console to display the print server screen, and
then check that “C250P” (the created printer) is shown as “Waiting for
Job” for the connected printer (0).