Konica Minolta C250P - Manual (Page 316)

Loading copy paper 5
C250P 5-21
Loading paper into the bypass tray
Paper can be fed manually through the bypass tray if you wish to print onto
paper that is not loaded into a paper tray, or if you wish to print onto thick
paper, postcards, envelopes, overhead projector transparencies or label
sheets.
To load paper (bypass tray)
1
Open the bypass tray.
– When loading large-
sized paper, pull out
the tray extension.
2
With the side to be printed on facing down, insert the paper as much
as possible into the feed slot.
? What should be done if the paper is curled?
% Flatten the paper before loading it.
3
Slide the lateral guides
to fit the size of paper
being loaded.
– If envelopes are
loaded, continue
with step 4.
Tray extenstion
Lateral
guides