Printing with netware – Konica Minolta C250P User Manual
Page 116
Setting up the printer driver
2
C250P
2-53
Printing with NetWare
The printer controller supports the following environments.
Network printing in a NetWare environment
For remote printer mode with NetWare 4.x Bindery Emulation
Before using bindery emulation, check that bindery emulation is compatible
with the NetWare server.
1
From a client computer, log on with Supervisor permissions to access
the NetWare server where Pserver is registered.
2
Start up Pconsole.
3
From the “Available Options” list, select “Quick Setup”, and then click
the [Enter] button.
4
Enter the appropriate names in the “Printer Server Name”, “Printer
Name”, “Print Queue Name”, and “Print Queue Volume” fields, select
“Other/Unknown” from the “Printer type” field, and then save the spec-
ified settings.
5
Click the [Esc] button to quit Pconsole.
6
Use the NetWare server console to load PSERVER.NLM.
NetWare Version
Protocol Used
Emulation
Service Mode
NetWare 4.x
IPX
NDS/Bindery
Pserver/Nprinter
NetWare 5.x/6
IPX
NDS
Pserver
TCP/IP
NDPS(lpr)