Konica Minolta C250P - Manual (Page 61)

Installation and operation precautions 1
C250P 1-42
Automatically conserving energy (Sleep mode)
If no operation is performed for a specified length of time, the machine auto-
matically enters a mode where it conserves energy.
Although the machine conserves more energy in Sleep mode than in Low
Power mode, the machine must warm up when Sleep mode is canceled to
begin printing again, therefore taking more preparation time than Low Power
mode.
As the factory default, the machine enters Sleep mode after 15 minutes.
2
Note
When a print job is received, the machine recovers from Low Power
mode and begins printing after it has finished warming up (within 110
seconds at normal room temperature (73.4 °F)).
The Sleep mode can also be canceled by pressing any key in the control
panel.
!
Detail
The length of time until the machine enters Sleep mode can be changed.
For details, refer to “User Setting” on page 4-33.
Power supply
Be sure to turn off the machine if it is not to be used for a long period of time,
for example, overnight.
In order to ensure that no energy is being consumed, unplug the machine.