Konica Minolta C250P - Manual (Page 188)

Specifying printer driver settings 3
C250P 3-55
Setting the file margin
File margins are added to the document before it is printed.
1
Click the Layout tab.
2
From the “Binding Position” drop-down list, select the position of the
binding margin.
Stapling
Multiple-page documents can be stapled.
1
Click the Layout tab.
2
From the “Staple” drop-down list, specify the number of staples and
the stapling position.
2
Note
The staple function is available only when optional Finisher is installed.
2
Note
Depending on the selected Binding Position setting, different stapling po-
sitions are available.
The number of staples that can be selected varies depending on the fin-
isher that is installed.
When optional finisher FS-501 is installed, “1 staple” can be set. When
optional finisher FS-514 or FS-603 is installed, “1 staple” or “2 staples”
can be set.